Payments accepted by Bank Transfer, email me, I cannot take credit card. Mail Order minimum of £10.00 Insured p/p
|
Payments accepted by Bank Transfer, email me, I cannot take credit card. Mail Order minimum of £10.00 Insured p/p
|
|
|
Ordering is easy. Email sales@reloading.org.uk telling me what you want, I will reply giving you the total price and payment options. Reloading Dies Supplied to order from all the top manufacturers. Lee 308 and 223 dies in stock Reloading Equipment in stock Lee Reloading Stand
The stand also includes a sturdy steel shelf with two bench plate receivers that will neatly and securely store your extra presses or mountable accessories. Each leg has eight mounting holes that allow you to accessorise your stand with a multitude of bins, shelves or accessory racks. Dimensions: 39" high x 26" wide x 24" deep. £193.00
Lee Bench Plate
Lee Bench Plate allows for quick press removal without unbolting from bench. Includes 1 steel base block that fits all current Lee metallic presses. Special elevator bolt hardware included. Powder coated, thick steel mounts quickly and securely to any bench or tabletop. Wide steel plate distributes load, adding rigidity to the lightest bench top. £36.00
Lee Bench Plate Screw Upgrade Kit A
A set of 4 finger adjustable screws to fit the Lee Bench plate, these allow the quick swapping of the press without the need for a screwdriver to do and undo the standard screws. £8.00
Lee Bench Plate Screw Upgrade Kit B
A set of 4 finger adjustable screws to fit the Lee Bench plate, these allow the quick swapping of the press without the need for a screwdriver to do and undo the standard screws. £8.00
Lee Steel Bench Block
Constructed of thick steel, with a durable black powder-coated finish. Integral tabs on plate ensure positive location and proper plate retention. Steel Bench Block comes complete with mounting holes for all current Lee Presses. Hardware for mounting one reloading press is included. £ 16.00
Storage Rack for Lee Steel Bench Plates and Presses.
Storage rack for an additional press, If you keep one press on your bench plate and you have a second press. These plastic rails allow you to safely store your second press on any flat surface by screwing them down with standard 4mm screws (not supplied). These will break if you try to use them instead of a bench plate for reloading, they are a storage rack only. Twin rail starter pack £8.00
Storage rack for further press, used in conjunction with the above rack if you have two or more presses. This plastic dual rail block allow you to safely store your additional presses on any flat surface by screwing it down with standard 4mm screws (not supplied). By adding addition blocks you can mount as many presses as you want These will break if you try to use them instead of a bench plate for reloading, they are a storage rack only. Dual rail add on Block £8.00
Lee Value 4 Hole Turret Press with Auto Index
Turret Presses offer single station simplicity with near progressive speed. £148.00 Shown on the Lee Reloading stand and bench plate, These are NOT included with the press.
Lee Classic 4 Hole Turret Press
The Pro 1000 and Value Turret Press roller handle upgrade kit includes everything you need to upgrade your ball grip to an ergonomic foam roller handle grip and all steel linkage. £30.00 Please Note: This handle can not be used on the Classic Turret Press, Breech Lock Classic Cast, Classic Cast, Load-Master or Reloader Press.
Lee Classic 4 Hole Turret Press
Considered one of the most convenient presses to own, the Classic Turret Press features solid cast iron construction and a 3-1/2" ram stroke. It features the same steel linkage of the Classic Cast Press. Made from steel and cast iron, the Classic Turret works with small and large primers on the lever prime system. The Auto-Indexing feature can easily be
deactivated, leaving the ram with 3-9" of stroke length. £204.00
This does not include the Lee Safety Prime Tool but can be purchased separately.
Lee Auto Breech Lock Pro Press
Announcing a new concept in automatic reloading presses. A true progressive press for less than the cost of a premium single stage press. Order a set of Lee dies and a shell plate (required to use this press and sold separately) and you have everything you need to start reloading. £195.00 Easy to use with no adjustments. (User has to make initial die adjustment into the Breech Lock bushings. Once set, the Breech Lock system allows for instant change.) Modular construction allows as much or as little automation as the operator desires with no adjustments. Cartridge changeover in seconds, including primer size with no adjustments. Breech Lock quick change feature in all four positions with no adjustments. Exclusive auto case placer with no adjustments. Through ram primer disposal with convenient built-in primer disposal tube. Includes four breech lock bushings, large and small priming arms, hex wrenches for calibre changes with built in storage rack for tools.
Lee Deluxe Automatic
Processing Press
Introducing the Lee Automatic Processing Press (APP Press), the fastest and
easiest way to prepare cases and size cast bullets. It is also a very convenient
single station reloading press.
£135.00 Shown on the Lee Reloading stand and bench plate with a red parts bin , These are NOT included with the press.
Roller Handle Upgrade Kit
Lee App Roller handle upgrade kit includes everything you need to upgrade your
stock red grip, to an ergonomic hardwood roller handle. Specially designed left
and right replacement steel levers included. Roller handle installs on the App
press using existing hardware.
£35.00
Reloading.org.uk APP Roller Handle Upgrade Kit (1)
The Reloading.org.uk produced upgrade kit for the Lee App Press. The kit includes everything you need to upgrade your stock red grip, to an ergonomic Red 3d printed plastic roller handle. this kit uses the existing left and right steel levers which are swapped left to right a new set of fixing nuts and bolts where needed and the handle. The handle has an internal spindle which bolts to the steel levers, this gives a strong ridged fixing whilst allowing the handle to rotate. Roller handle installs on the App press as shown in the picture and operates with all parts that work with the official kit at half the price. . £15.00
The new bolts have a bearing sleeve which can be tight in the holes in the linkages if you have difficulty fitting these sleeves you will will need clean them out with a 8mm drill. This tightness is often caused by paint on the inside of the hole. If you buy a press and a roller handle upgrade kit from Reloading we will fit the roller handle and include all the removed parts at no extra charge.
Reloading.org.uk APP Roller Handle Upgrade Kit (2)
The Reloading.org.uk produced upgrade kit for the Lee App Press. The kit includes everything you need to upgrade your stock red grip, to an ergonomic Red 3d printed plastic roller handle. This kit uses the existing left and right steel levers replaces the standard red handle. The handle has an internal spindle which bolts to the steel levers, this gives a strong ridged fixing whilst allowing the handle to rotate. Roller handle installs on the App press as shown in the picture and operates with all parts that work with the official kit at just over a third of the price. £12.00
Lee Classic Cast Single Stage Press
This single stage press has a rigid, cast
iron "O" frame with an attractive baked powder finish, large opening and 4" ram
stroke. It features powerful steel compound linkage with travel stop to prevent
"cam-over". Also features automatic primer arm with bottom of stroke priming and
a large 1-1/8" diameter ram. Includes small and large primer cups. Accepts both
standard 7/8"-14 threaded dies and the larger 1-1/4"-12 threaded dies when the
7/8"-14 thread adapter is removed. Adjustable for right or left hand use.
£232.00
Lee Breech lock Classic Cast Single Stage Press This single stage press has a rigid, cast iron "O" frame with an attractive baked powder finish, large opening . It features powerful steel compound linkage with travel stop to prevent "cam-over". Also features automatic primer arm with bottom of stroke priming and a large diameter ram. Includes small and large primer cups. Accepts standard 7/8"-14 threaded dies . Adjustable for right or left hand use. Best of all, it includes the Breech Lock Quick Change die system. Change dies instantly with a twist of the wrist, and you never have to re-adjust your die. Other features include all steel linkage with adjustable length lever. Press includes one Breech Lock quick change bushing. £140.00
Lee 4 Hole, Classic 3 and 4 Hole Turret Press Turret  Allows
the reloader to change calibres without having to readjust dies. Simply lift the
entire turret out and replace it with another.For the Lee 4 Hole and Classic 4 Hole Press only. £18.00
For the Lee 3 Hole Press only. £18.00 Fits standard 7/8"-14 thread dies
Second Hand Demonstrator Presses S/H Lee Deluxe Automatic Processing Press
Introducing the Lee Automatic Processing Press (APP Press), the fastest and
easiest way to prepare cases and size cast bullets. It is also a very convenient
single station reloading press.
£90.00 Shown on the Lee Reloading bench plate with a screw upgrade kit , These are NOT included with the press.
|
The
Lee Reloading Stand
is built just for your reloading needs. The sturdy powder coated steel stand
places your press at the perfect counter stool or standing height, whilst the
three-leg design assures absolute stability regardless of the floor condition.
Rubber tipped legs suitable for any surface. The thick steel top is fitted with
the patented, quick change
Lee Bench Plate
System with steel base block to fit all Lee metallic presses.
The
Lee Steel Bench Block is designed to work in conjunction with the Patented Lee
Bench Plate system, featured on the the quick change Lee Bench Plate and Lee
Reloading Stand. .jpg)
.jpg)
.jpg)
.jpg)
Lee
4-hole Turret Press with auto index includes built in primer catcher and New
Lever Prime System. Uses universal shell holder and standard 78x14" thread dies.
(Discontinued product with all the advantages of the press above except it wont
accept the large series dies for reloading .50 cal, 577/450 or .577. )