Ordering is easy.
Email
sales@reloading.org.uk
telling me what you want, I will reply giving you the total price and payment
options.
Mail Order minimum of £8.00 Insured p/p
Reloading Dies Supplied to order from all the top manufacturers. Lee 308 and 223 dies in stock
Reloading Equipment in stock
Lee Reloading Stand
The
Lee Reloading Stand
is built just for your reloading needs. The sturdy powder coated steel stand
places your press at the perfect counter stool or standing height, whilst the
three-leg design assures absolute stability regardless of the floor condition.
Rubber tipped legs suitable for any surface. The thick steel top is fitted with
the patented, quick change
Lee Bench Plate
System with steel base block to fit all Lee metallic presses.
The stand also includes a sturdy steel shelf with two
bench plate receivers that will neatly and securely store your extra presses or
mountable accessories.
Each leg has eight mounting holes that allow you to
accessorise your stand with a multitude of bins, shelves or accessory racks.
Dimensions:
39" high x 26" wide x 24" deep. £140.00
Lee Bench Plate

Lee Bench Plate allows for quick press removal without unbolting from bench.
Includes 1 steel base block that fits all current Lee metallic presses. Special
elevator bolt hardware included. Powder coated, thick steel mounts quickly and
securely to any bench or tabletop. Wide steel plate distributes load, adding
rigidity to the lightest bench top.
£26.00
Lee Bench Plate Screw Upgrade

A set of 4 finger adjustable screws to fit the Lee Bench plate, these allow
the quick swapping of the press without the need for a screwdriver to do and
undo the standard screws. £6.00
Lee Steel Bench
Block
The
Lee Steel Bench Block is designed to work in conjunction with the Patented Lee
Bench Plate system, featured on the the quick change Lee Bench Plate and Lee
Reloading Stand.
Constructed of thick steel, with a durable black powder-coated
finish. Integral tabs on plate ensure positive location and proper plate
retention. Steel Bench Block comes complete with
mounting holes for all current
Lee Presses. Hardware for mounting one reloading press is included.
£
13.00
Storage Rack for Lee Steel Bench Plates and Presses.
.jpg)
.jpg)
Storage rack for an additional press, If you keep one press on your bench
plate and you have a second press.
These plastic rails allow you to safely store your second press on any flat
surface by screwing them down with standard 4mm screws (not supplied).
These will break if you try to use them instead of a bench plate for
reloading, they are a storage rack only. Twin rail starter pack £8.00
.jpg)
.jpg)
Storage rack for further press, used in conjunction with the above rack if
you have two or more presses.
This plastic dual rail block allow you to safely store your additional
presses on any flat surface by screwing it down with standard 4mm screws (not
supplied).
By adding addition blocks you can mount as many presses as you want
These will break if you try to use them instead of a bench plate for
reloading, they are a storage rack only. Dual rail add on Block £8.00
Lee Value 4 Hole Turret Press
with Auto Index

Lee 4-hole Turret Press with auto index includes built in primer catcher and
New Lever Prime System. Uses universal shell holder and standard 78x14" thread
dies.
Turret Presses offer single station simplicity with near progressive speed.
£109.00
Shown on the Lee Reloading stand and bench plate, These are NOT
included with the press.
Lee Classic 4 Hole Turret Press

The Pro 1000 and Value Turret Press roller handle upgrade
kit inludes everything you need to upgrade your ball grip to an ergonomic foam
roller handle grip and all steel linkage. £30.00
Please Note: This
handle can not be used on the Classic Turret Press, Breech Lock Classic Cast,
Classic Cast, Load-Master or Reloader Press.
Lee Classic 4 Hole Turret Press

Considered one of the most convenient presses
to own, the Classic Turret Press features solid cast iron construction and a
3-1/2" ram stroke.
It features the same steel linkage of the Classic Cast Press.
Made from steel and cast iron, the Classic Turret works with small and large
primers on the lever prime system.
The Auto-Indexing feature can easily be
deactivated, leaving the ram with 3-9" of stroke length. £141.00
Technical Information
4.5" of cartridge clearance, 1.125" outside
diameter ram. Dies, shell holders and additional 4 hole turret heads are
sold separately. Accepts all standard 7/8"-14 threaded dies and standard
shell holders.
This does not include the Lee Safety Prime Tool
but can be purchased seperatly.
Lee Auto Breech Lock
Pro Press

Announcing a new concept in automatic reloading presses. A true progressive
press for less than the cost of a premium single stage press. Order a set of Lee
dies and a shell plate (required to use this press and sold separately) and you
have everything you need to start reloading. £143.00
Easy to use with no adjustments. (User has to make initial die adjustment
into the Breech Lock bushings. Once set, the Breech Lock system allows for
instant change.)
Modular construction allows as much or as little automation as the operator
desires with no adjustments.
Cartridge changeover in seconds, including primer size with no adjustments.
Breech Lock quick change feature in all four positions with no adjustments.
Exclusive auto case placer with no adjustments.
Through ram primer disposal with convenient built-in primer disposal tube.
Includes four breech lock bushings, large and small priming arms, hex
wrenches for calibre changes with built in storage rack for tools.
Lee Deluxe Automatic
Processing Press

Introducing the Lee Automatic Processing Press (APP Press), the fastest and
easiest way to prepare cases and size cast bullets. It is also a very convenient
single station reloading press.
£98.00
Includes:
Press
Automation Kit
X-PRESS shell holders 2, 4 and 19
Bottle Adapter
Shown on the Lee Reloading stand and bench plate with a red parts
bin , These are NOT included with the press.
Roller Handle Upgrade Kit

Lee App Roller handle upgrade kit includes everything you need to upgrade your
stock red grip, to an ergonomic hardwood roller handle. Specially designed left
and right replacement steel levers included. Roller handle installs on the App
press using existing hardware.
£30.00
Reloading.org.uk APP Roller Handle Upgrade Kit
(1)

The Reloading.org.uk produced upgrade kit for the
Lee App Press. The kit includes everything you need to upgrade your
stock red grip, to an ergonomic Red 3d printed plastic roller handle. this kit
uses the existing left
and right steel levers which are swapped left to right a new set of fixing
nuts and bolts where needed and the handle. The handle has an internal spindle
which bolts to the steel levers, this gives a strong ridged fixing whilst
allowing the handle to rotate. Roller handle installs on the App
press as shown in the picture and operates with all parts that work with the
official kit at half the price. .
£15.00
The new bolts have a bearing sleeve which can be tight
in the holes in the linkages if you have difficulty fitting these sleeves you
will will need clean them out with a 8mm drill. This tightness is often
caused by paint on the inside of the hole. If you buy a press and a roller
handle upgrade kit from Reloading we will fit the roller handle and include all
the removed parts at no extra charge.
Reloading.org.uk APP Roller Handle Upgrade Kit
(2)


The Reloading.org.uk produced upgrade kit for the
Lee App Press. The kit includes everything you need to upgrade your
stock red grip, to an ergonomic Red 3d printed plastic roller handle. This kit
uses the existing left
and right steel levers replaces the standard red handle. The handle has an
internal spindle which bolts to the steel levers, this gives a strong ridged
fixing whilst allowing the handle to rotate. Roller handle installs on the App
press as shown in the picture and operates with all parts that work with the
official kit at just over a third of the price.
£12.00
Lee Classic Cast Single Stage Press

This single stage press has a rigid, cast
iron "O" frame with an attractive baked powder finish, large opening and 4" ram
stroke. It features powerful steel compound linkage with travel stop to prevent
"cam-over". Also features automatic primer arm with bottom of stroke priming and
a large 1-1/8" diameter ram. Includes small and large primer cups. Accepts both
standard 7/8"-14 threaded dies and the larger 1-1/4"-12 threaded dies when the
7/8"-14 thread adapter is removed. Adjustable for right or left hand use.
£164.00
Technical Information
Die Size Accepted: 1-1/4-12" Threaded Dies, 7/8"-14 Threaded Dies,
Adaptor included
Spent Primer Collected through a tube that can be directed into a
trash can underneath the press
Ram Stroke: 4" Ram Diameter: 1-1/8" Automatic Primer Arm with Bottom of
stroke priming
Used
RCBS Partner Press

The
Partner is easy to use and incredibly durable. It's RCBS's least expensive press
offers big performance in a compact package. Its also perfect as a second press
for different operations - Compound leverage system - Durable steel links -
Priming arm eliminates the need for separate priming tool (Only
Small primer arm included)
- Reloads most standard calibres - Compact size, perfect for range use
£60.00
Lee Pro Auto-Disk Powder Measure

The first choice for commercial reloaders or competitive shooters! Elastomer wiper and
Teflon coated metal casing make this the smoothest operating measure. Will not
cut powder and almost totally eliminates leakage. Large hopper with shut-off
valve is attached with brass thumb nuts for the ultimate in disk changing
convenience. Increased safety with positive pull-back lever. Swivel adapter,
spring return lever with spring and all four disks included,
£46.00
Used Lee Pro Auto-Disk Powder Measure

This is basically the same as the powder measure above but may be the earlier
model which did not have the black Teflon coating. They will either come
with 4 disks or an adjustable charge bar. None of these powder measures
have the chain return system included all are spring return. 2 in stock.
£30.00 each
Lee Perfect Powder Measure

Lee Perfect Powder Measure is best for reloading rifle cases, can also be
used for pistol cases. Throws charges from 2 to over 100 grains. Can be used with the
Universal Charging Die on the Load Master (not included).
This is the latest version of the perfect
powder measure and cannot be topped up easily as the powder
container has to be completely removed and turned upside down to fill.
£27.00
An
Upgrade from the old red hopper to the new bottle hopper is available for £6.00
Top fill Hopper with Lid fit the above powder measure.

There
are 3 sizes of powder hopper, 500ml, 250ml and 125ml, all come with a threaded
adaptor. Please state size when ordering
The hopper supplied as standard on the lee powder measure is just under
250ml.
To replace the bottle on the lee powder measure, simply unscrew the bottle
and screw in the new hopper its that simple £8.00
The new powder hopper can be supplied with a powder baffle at additional cost .(£5.00)



LEE AUTO DRUM POWDER MEASURE

Auto-Drum Powder Measure Automatic case actuated drum powder measure.
Accurately and automatically dispense powder in your favorite cartridge. Two
infinitely adjustable drums included. These Quick Change drums will accurately
and reliably drop charges from 1 to 80 grains of powder. £47.00
Case actuated; never spill a charge.
Exclusive elastomer wiper prevents powder shearing, works great with difficult
metering extruded powders.
Machined body with labyrinth groove mates to the precision moulded nylon drums
providing a leak free fit with the finest powders.
Drum is actuated by a steel sector and pinion gear train.
Quick-change hopper has on/off valve to quickly change powders.
Sleek modern design, all gears springs and levers inside the die cast housing.
Same swivel adapter as our famous Pro Auto-Disk powder measure. Makes moving
measure fast and convenient.
Double charge disconnector reduces the chance of a double charge on progressive
presses. (Press must have a fixed tool head or turret to use this feature.)
Handgun and rifle drums included.
NOTE The measure on the right is the newer version of the perfect
powder measure and cannot be topped up easily as the powder
container has to be completely removed and turned upside down to fill. Reloading
will be supplying the Top fill version until stocks run out and then the
top fill hopper will be offered as an additional item.
If you want the new version please state clearly on your order.
Upgrade from old red hopper to new clear bottle hopper is available for £6.00
LEE CLASSIC POWDER MEASURE

The latest addition to the Classic Cast line of reloading tools is the Lee
Classic Powder Measure. No powder measure, regardless of price, has all the
features of the Lee Classic Powder Measure. £81.00
Rugged Construction:
This powder measure features a machined cast iron body; no other material has
the heft, stability and rugged appearance that cast iron offers. The
precision-machined rotor drum is cast from brass, which is naturally antistatic
and spark proof.
Eliminates Cut Powder and Jerky Action:
A soft elastomer wiper strikes off the metering chamber rather than cut the
powder. Youll be surprised at how smoothly the rotor operates. More importantly,
you will enjoy the most uniform of changes.
Easy to Set and Read Micrometer Metering Chamber:
Powder charge adjustment is accomplished with a true micrometer adjustable
metering chamber. The metering chamber is aluminum with a black anodized finish
and features a crisp, permanent, laser engraved scale. The brass micrometer
thimble is engraved with .01cc graduations and has a releasable detent lock.
With most rifle powders each click is about a 1/10 of a grain, perfect for
working up a load.
Changing Powder is Fast and Easy:
The Classic Powder Measure features an easily removable ½ pound capacity hopper
with an on/off valve so you can quickly return unused powder to its original
container or switch to another type. The hopper feeds to a pre-measuring chamber
allowing precise charges regardless of the powder level in the hopper, no
additional powder baffle required.
Quick Change Drums
One of the nicest features is the ability to use the new Lee standard
quick-change drums (product # 90453). These low cost drums can be preset to your
favourite charge and swapped out in seconds.
LEE QUICK CHANGE DRUM SET

All drums are infinitely adjustable within range. No tools are required for
adjustment. A graduated adjsutment key included with each drum.
Each turn of the
adjusting screw is .1cc or about 1 grain of powder. Each key is marked with
.01cc graduations allowing easy 1/10 grain powder adjustments. £18.00
Features four precision molded nylon drums:
(2) small drums for charging 25 ACP to 223 Remington
(2) large drums for charging the 223 Remington to Large Magnums. Also include an
insert to allow reduced capacity charging similar to smaller drum.
Quick Change Drum Set can be used in conjunction with the Classic Powder Measure
and the Auto Drum Powder Measure.
Quickly set your charge, and mark it and the powder type on the flat of the drum
set for easy reference for future reloading.
LEE POWDER MEASURE STAND

A real powder measure stand, not a cast or stamped bracket. No need to bolt
or screw this beefy stand to your work bench. Heavy powder coated steel stand
compliments any brand or colour powder measure. Works especially well with other
brands of powder measures that do not have the Lee on/off valve or removable
hopper feature. When you want to change powders or empty the hopper. Simply lift
the stand and you can pour the powder from your measure. When you are finished,
store your measure away freeing up valuable bench space. £30.00
Powder coated steel construction.
7/8 mounting hole for all popular measures.
Includes 3 no slip feet.
Rock solid mount improves measure consistency.
Space saving freestanding design is portable and convenient.
Lee Precision Powder Measure Bottle Adapter (see reloading.org.uk version
under Lee upgrades)
Allows dispensing powder
directly from the shipping container of most popular powder manufactures.
Includes a crystal clear bottle that holds over a half a pound of ball powder.
Works on many American powder manufacturers containers. (53mm or 43mm thread)
Does not work on Reloader Swiss, Lovex or many European manufacturers
containers, powder is therefore decanted in to the clear plastic bottle
supplied. £6.00
D
ispensing
powder directly from the bottle assures positive identification of the powder
type.
Adapter is manufactured from Polypropylene, resistant to
attack from all types of powder.
Now you can turn off the powder flow and store your powder in
its original container with no fear of misidentifying or damage to your hopper
from chemical attack.
Viewing window allows monitoring powder level in use without
removing bottle.

1
Remove black hopper valve from your powder measure with Phillips screwdriver.
2 Attach hopper valve from your powder measure to the bottle
adapter, with Phillips screwdriver. Lightly snug screw so that the valve can
open & close.
3 Thread on to powder container for use. Rotate clockwise to
close the valve, rotate counter clockwise to open valve. line up to tab
Additional Containers for use with Lee
Measure Bottle Adapter
.jpg)
The container second from the right is the one supplied with
Lee Precision Powder Measure Bottle Adapter as above and
all the new powder measures.
The all containers screw in
to the Lee
Measure Bottle Adapter
and replace the supplied clear bottle.
Far left 400ml container
with red adaptor (converts 48mm thread to a 53 mm thread) £5.00
Third from left 100ml container
£2.00
Forth from left 50ml container
£1.00
A range of containers that screw
in to the Lee
Measure Bottle Adapter
with
powder baffles and removable ends are available under Lee Upgrades.

Two further containers
Left 250ml container £5.00
Right 125ml container £5.00
Powder Measure sieve lid

This
device sits on the top of your Lee powder measure instead of the lid. When
you have to take a round apart with a kinetic you simply remove the brass case
and empty the hammer in to the sieve. the powder flows through the holes back in
to the powder measure allowing you to recover the bullet and powder easily.
The holes in the bottom are 5mm so will catch all bullets .223 upwards.
£8.00.
This device could be made to fit other manufacturers powder measures but you
would have to send me the diameter of the pot and the wall thickness £10.00
RELOADR SCALES
The
RELOADR digital powder scale has a range of fantastic features and is a must for
any shooter looking to reload their ammunition with consistency and accuracy in
mind. The platform 77mm x 59mm is made from black titanium chrome and has a
White LCD backlit screen, requires 2 x AAA batteries included.
Includes -2 x 10g weights, Powder Pan, Tweezers, Antivibration Mat, Hard Stoarge
Travel Case, 2 x AAA batteries. Warranty 3 Years £50.00
Features
- Selectable Auto-Off
- Tare
- Linear Calibration
- Overload protection
- Anti Vibration Mat
- Hard Storage Travel Case
-Capacity - 300gn 20g
-Resolution - 0.1gn 0.001g
-Modes - Grains Grams
-Platform Size - 77mm x 59mm

Digital powder scale with 200gram check weight
and powder funnel. £25.00
 |
Product features
|
 |
0.2gn/0.01g
resolution |
 |
Modes: G-Oz-Gn-Ct |
 |
Platform size: 69mm
x 69mm |
 |
Platform Build:
Stainless Steel |
 |
Display: White
Backlit LCD |
 |
Warranty: 3 Years |
 |
Power: 2 x AAA
Batteries (Included) |
Reloading Powder Trickler


The Reloading
trickler delivers exact powder charges, down to
1/10th of a grain, to top off the initial powder charge. The 8mm bore of the
spigot allow individual sticks or balls of powder to be dispensed accurately and
easily.
Wide, tip resistant weighted body and aluminium spigot ensures ease of use. The
trickler body is 3d printed in Pet.G plastic and has a long reach aluminium
spigot.
£15.00

Auto Bench Prime XR
The
easiest, most convenient bench mounted priming tool on the market. Symmetrical
design allows effortless right or left hand operation. Comfortable lever with
just the right amount of mechanical advantage effortlessly seats even the most
difficult primers with just finger pressure. The perfect mechanical advantage to
feel the primer seating completely home into the primer pocket. £32.00
Includes priming assemblies for large and small primers. Made of a water clear
tough polyester material that allows you to monitor the primers passage from the
tray to the primer pocket. Change primer size or shell holder in seconds.
Includes the new folding tray—go from box to priming in seconds. Tray has a
built-in primer flipping feature allowing direct filling from today’s large
primer boxes. The tool mounting holes are spaced for the Lee Bench Plate system
(#90251) or can be mounted directly to your workbench.
Uses special, but inexpensive priming tool shell holders, so there’s no need to
endlessly swap press shell holders to prime.
Used Lee Auto Prime
Lee Auto prime
hand priming tool is a fast, safe, and effective way of priming cases.
£10.00
comes
with large and small primer trays.
Lee Auto Prime and Bench Prime shell holders
All sizes, £2.60
Lee Safety Prime Priming Unit Large + Small Primers Post
2006 Presses

Contaminating your primers with oily hands
can sometimes lead to a hazardous load. The Lee Safety Prime eliminates the need
to touch them at all, or at least until they are safely loaded into the brass.
Quickly and easily feed the primer with a simple click. This priming tool is for
use with both small and large primers. Works on all Lee presses that feature the
Lever Prime System (LPS). £26.00
Technical Information Note: For use with
Leejhu878 presses manufactured in 2006 and later.
Press must have the Lever Prime System (LPS) for this to fit.
May require powder measure riser on turret presses (Not include)
Used Lee Safety Prime Priming Unit Large
+ Small Primers Post
2006 Presses. 2
Available

1) Used safety prime in box it has signs
of use (dirty) which would clean off. comes with a bracket for classic
turret press (with spacer washer) and the original turret press. £18.00
2) Used safety prime in box it has signs
of use (dirty) which would clean off. comes with a bracket for classic
press and the breach lock classic/challenger press. £18.00
Contaminating your primers with oily hands
can sometimes lead to a hazardous load. The Lee Safety Prime eliminates the need
to touch them at all, or at least until they are safely loaded into the brass.
Quickly and easily feed the primer with a simple click. This priming tool is for
use with both small and large primers. Works on all Lee presses that feature the
Lever Prime System (LPS).
Technical Information Note: For use with
Lee Classic Cast presses manufactured in 2006 and later.
Press must have the Lever Prime System (LPS) for this to fit.
This will not fit a Classic Turret Press unless another bracket is used to
mount it, the bracket is available from Lee Precision, their TP2699.
Requires powder measure riser (which is not include)
Lee 4 Hole, Classic
3 and 4 Hole
Turret Press Turret

Allows the reloader to change calibres without having to readjust dies. Simply
lift the entire turret out and replace it with another. For the Lee 4 Hole and
Classic 4 Hole Press only. £14.00
For the Lee 3 Hole Press only. £15.00
Technical Information
Fits standard 7/8"-14 thread dies
Lee Auto-Disk Adjustable Powder Charge Bar

The Lee Auto-Disk Adjustable Powder Charge Bar is adjustable between .28 CC
and 1.6 CC allowing the reloader to develop precise charges. Each adjustment
line on the thimble is .1CC. This charge bar comes packaged with a volume
measuring density chart for all of today’s popular powders and detailed setting
instructions. This is a disk with a micrometer setting on it to precisely adjust
the powder charge. It is always recommended to weigh out charges. £9.00
Lee Double Disk Kit raises powder hopper permitting two disks to be stacked
in powder measure. Doubles the capacity, also able to make very fine
adjustments. £13.00
3D printed in red Pet-G plastic. (The same plastic fizzy pop bottles are made
of.)