Bipods 2

Payments accepted by   Bank Transfer, email me, I cannot take credit card.  Mail Order  minimum of 9.00 Insured p/p

 

I have COVID so won't be open

until the 11/7/22 Earliest

 

Up

Harris Type Bipods

All bipods in this section look like the pictures below.

The  Bipod in the picture is shown with an optional adaptor for attaching to a Picatinny/Weaver rail, they do not come with this adaptor but the adaptor is available below if you need one.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Konos 15cm to 22cm Bipod with notched legs (6" to 9" approx)

The Konus 15cm to 22cm bipod is a well made copy of the Harris bipod and uses superior materials that give the bipod extra rigidity over may of the other copies out there. If you look at this bipod and put a Harris alongside it you would be hard pressed to see the difference except in the price. The built-in swivel rotates to either side for instant levelling on uneven ground. The hinge base with tension adjustment and buffer springs. This bipod has notched legs to allow for easy one handed adjustment of the height  A branded product for the same money as some shops sell unbranded copies of dubious quality.  This Bipod uses the standard sling swivel for attachment to a firearm in the same way a Harris bipod does  45.00

Konos 22cm to 33cm Bipod with notched legs (9" to 13" approx) The Konus 22cm to 33cm bipod is a well made copy of the Harris bipod and uses superior materials that give the bipod extra rigidity over may of the other copies out there. If you look at this bipod and put a harries alongside it you would be hard pressed to see the difference except in the price.The built-in swivel rotates to either side for instant levelling on uneven ground. The hinge base with tension adjustment and buffer springs. This bipod has notched legs to allow for easy one handed adjustment of the height  A branded product for the same money as some shops sell unbranded copies of dubious quality. This Bipod uses the standard sling swivel for attachment to a firearm in the same way a Harris bipod does  45.00

 

Range Right Pro-Tilt 9"-15" Bipod

The AirForce1 Pro-Tilt Bipods are not quite the same quality as the Konus bipod but is good value for the money,  they are manufactured with the heat treated steels, and hard alloys. The built-in swivel rotates to either side for instant levelling on uneven ground. The hinge base with tension adjustment and buffer springs. The Bipod attaches to a standard Sling Swivel Stud.  This bipod has notched legs to allow for easy one handed adjustment of the height

This Bipod uses the standard sling swivel for attachment to a firearm in the same way a Harris bipod does. 35.00

 

RangeRight Pro-Tilt 13"-22" Bipod

This bipod looks  the same as the bipod pictured above except it has longer legs.The AirForce1 Pro-Tilt Bipods are manufactured with the  heat treated steels, and hard alloys. The built-in swivel rotates to either side for instant levelling on uneven ground. The hinge base with tension adjustment and buffer springs. This bipod has notched legs to allow for easy one handed adjustment of the height

 

This Bipod uses the standard sling swivel for attachment to a firearm in the same way a Harris bipod does. 40.00

 

Bipod Tightening Handle for Range Right  and Konos

The Bipod tightening handle fits in place of the knurled adjustment nut on the above bipods and allows easy adjustment of the swivel head. it is now possible to adjust the rock of the head from very loose to no movement with one hand on the firing point. By pressing the orange button the handle can slide around the central shaft without turning it thus allowing the handle to be moved to the best position for easy adjustment. Only fits bipods with a 5mm male thread such as the ones listed above. 5.00

No fitting charge if purchased at the same time as one of the above bipods

 

 

Atlas Type Bipod

This Rifle Bipod   fits a  Picatinny Rail and is quick detachable via a lever release system.

It is adjustable from 6.5 - 9 inch

Specifications Color: Black
Weight: 13oz. / 362g
Adjustable Leg Lengths: 6.5-9 inch
Material: Aluminum Fits 20mm Rail QD Mount Features Full Pan & Tilt  40.00

 

 

 

 

 

Firewolf Bipod

Fully adjustable Pan and Tilting Head, Adjustable Leg Lengths: 7.25 - 9 inches, Weight 11.29oz, Attaches to a 1913 Picatinny rail and mounts in seconds

Legs can be placed in one of 5 positions front to back and can be  extended through 4 positions

Colour: Black, Material: Aluminium

Legs are spring-loaded and retract with the touch of a button.

The leg extension design allows the shooter to quickly adjust to different heights without having to align each leg equally. 40.00

 

 

 

 

 

 

Firewolf Long range bipod

 

This long leg Long Range Accuracy Light Tactical Bipod adjusts from 6.6"" to 10"" with a 10 left and right adjustable cant and legs positions including 0, 22, 45, and 90.

Specifications Weight: 1.4 lbs 80.00

 

 

 

 

Lightweight Telescopic shooting sticks (Tripod)

HSF Shooting Stick Lightweight versatile telescopic shooting sticks designed to provide a steady rest out in the field. Adjustable between 33" and 75" 30.00

 

 

 

 

 

 

 

 

Lightweight Telescopic shooting sticks (Bipod)

 

HSF Shooting Stick Lightweight versatile telescopic shooting sticks designed to provide a steady rest out in the field. Adjustable between 33" and 75" 25.00

 

 

 

 

 

 

Picatinny rail sling swivel.

This adaptor allows any device that attaches to a standard sling swivel to be attached to a firearm that has a Picatinny/Weaver rail. Commonly use to attach Harris Type Bipods and Slings. 5.00

 

 

 

 

 

 

 

Uncle Mike's Sling Swivel Stud 3/4" Wood Screw 2.00

 

 

 

 

 

Uncle Mike's Sling Swivel Stud 7/8" Machine Screw with Nut  2.00